ENEBY support
How to set up ENEBY 30 Bluetooth speaker*
- Connect the power cord to ENEBY speaker and to the main wall outlet.
- To turn on or off, press the knob on the front of the speaker.
- On your mobile device, go to the Bluetooth menu and look for ENEBY 30.
- You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.
- Turn the knob to adjust volume.
* Concerns the codes: 204.013.89; 903.576.32
How to change sound settings on ENEBY 30 Bluetooth speaker*
- Turn on the speaker, then press and hold the knob for 3 seconds. Now you can adjust the bass setting.
- Press once more to change the treble. Press again to confirm your settings.
- To reset the speaker settings and forget all connected devices, press and hold the knob for 10 seconds.
* Concerns the codes: 204.013.89; 903.576.32
A quick look at how to adjust the bass and treble settings on your ENEBY 30 Bluetooth speaker.
.How to set up ENEBY 20 Bluetooth speaker*
- Connect the power cord to ENEBY and to the main wall outlet.
- To turn on or off, press the knob on the front of the speaker.
- On your mobile device, go to the Bluetooth menu and look for ENEBY 20.
- Through Bluetooth, you can connect up to eight devices to ENEBY speaker.
- You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.
- Turn the knob to adjust volume.
- To make your speaker portable, attach the handle and use the ENEBY battery pack (sold separately).
* Concerns the codes: 204.014.69; 403.574.65
A quick guide to get up and running with your ENEBY 20 Bluetooth speaker.
.How to change sound settings on ENEBY 20 Bluetooth speaker*
- Turn on the speaker, then press and hold the knob for 3 seconds. Now you can adjust the bass setting.
- Press once more to change the treble. Press again to confirm your settings.
- To reset speaker settings and forget all connected devices, press and hold the knob for 10 seconds.
* Concerns the codes: 204.014.69; 403.574.65
How to set up ENEBY portable Bluetooth speaker*
- Insert three, rechargeable LADDA 900 AAA batteries. You can open and close the battery lid with a coin or similar.
- Press the on/off button for two seconds to turn on the speaker and enter the Bluetooth mode. On your mobile device, go to the Bluetooth menu and look for ENEBY Portable.
- You can also connect your device directly to ENEBY with the AUX-in and a 3.5mm audio jack.
- To charge the LADDA 900 AAA batteries inside the speaker, use the included USB cable.
* Concerns the codes: 204.013.89; 903.576.32; 204.014.69; 403.574.65
How to set up ENEBY built-in Bluetooth speaker*
- Insert three, rechargeable LADDA 900 AAA batteries. You can use a screwdriver to open and close the battery lid on the bottom. Use the included USB cable to charge the LADDA 900 AAA batteries inside the speaker.
- You’ll need a FIXA hole saw if you want the speaker built-in to a piece of furniture.
- To turn on the speaker and enter the Bluetooth mode, press the on/off button for two seconds. On your mobile device go to your Bluetooth menu and search for ENEBY Built-in.
- You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.
* Concerns the codes: 204.013.89; 903.576.32; 204.014.69; 403.574.65
This quick guide shows you how to set up, install and start enjoying your ENEBY built-in Bluetooth speaker.
.How to install ENEBY stand*
You can easily mount ENEBY 20 speaker and ENEBY 30 speaker on the ENEBY stand, with the two included bolts.
* Concerns the codes: 204.013.89; 903.576.32; 204.014.69; 403.574.65
How to install ENEBY wall mount*
You can attach ENEBY 20 speaker and ENEBY 30 speaker to a wall with the ENEBY wall mount. Always use screws and plugs that are suitable for the material in your wall.
* Concerns the codes: 204.013.89; 903.576.32; 204.014.69; 403.574.65
.
How to adjust bass and treble*
- Start playing a song
- Then press and hold the knob
- Hold the knob until the third red signal
- Adjust the bass
- Press once and adjust the treble
- Then press once to confirm the chosen settings
* Concerns the codes: 104.923.99; 804.924.52; 204.924.31; 304.924.21
How to disable auto-off function*
- Press and hold the knob
- Hold it until the fourth red signal appears
* Concerns the codes: 104.923.99; 804.924.52; 204.924.31; 304.924.21
How to stereo pair two speakers*
- Turn both speakers on
- Then press and hold the knobs at the same time
- Release when the LED light turns red the second time
- Then press the knob once on the left speaker
* Concerns the codes: 104.923.99; 804.924.52; 204.924.31; 304.924.21