This combo allows a lot of productivity in a small space. It has a dedicated spot for an appliance, a countertop and a cabinet for bulkier items. The sink is the key that makes this setup truly functional.
Dimensions
Dimensions
Product Dimensions
Width: 139 cm
Depth: 63.5 cm
Height: 87.5 cm
Depth: 63.5 cm
Height: 87.5 cm
Product Details
Product Details
Included products
GLYPEN mixer tap (30442365)
Quantity: x1
LILLVIKEN water trap/strainer 1 bowl (10311539)
Quantity: x1
ENHET supporting side panel/leg, 60x1.8x87.5 cm (70516095)
Quantity: x1
ENHET legs for cabinet 12.5 cm, 2 pack (10449018)
Quantity: x1
ENHET door, 60x75 cm (40457648)
Quantity: x1
FYNDIG single-bowl inset sink (90202126)
Quantity: x1
HEMTRÄSK countertop/laminate, 139x63.5 cm (20516111)
Quantity: x1
BILLSBRO handle, 2 pack (20334314)
Quantity: x1
ENHET base cabinet for sink, 60x60x75 cm (50440426)
Quantity: x1
Quantity: x1
LILLVIKEN water trap/strainer 1 bowl (10311539)
Quantity: x1
ENHET supporting side panel/leg, 60x1.8x87.5 cm (70516095)
Quantity: x1
ENHET legs for cabinet 12.5 cm, 2 pack (10449018)
Quantity: x1
ENHET door, 60x75 cm (40457648)
Quantity: x1
FYNDIG single-bowl inset sink (90202126)
Quantity: x1
HEMTRÄSK countertop/laminate, 139x63.5 cm (20516111)
Quantity: x1
BILLSBRO handle, 2 pack (20334314)
Quantity: x1
ENHET base cabinet for sink, 60x60x75 cm (50440426)
Quantity: x1
Material
Basematerial: Particleboard
Front side/ Backside: Plastic foil
Edge: Plastic edging
Handle: Aluminium, Epoxy/polyester powder coating
Side panel/ Bottom panel: Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging
Back rail/ Filling: Particleboard, Plastic foil, Plastic edging
Tube: Steel, Powder coating
Foot: Polypropylene plastic (min. 20% recycled)
Plate: Steel, Powder coating, Galvanized steel
Rivet: Steel, Epoxy/Acrylic coating
Tubes: Steel, Powder coating
Wedge: Steel, Epoxy/Acrylic coating
Basematerial: Stainless steel
Foam: Polyurethane plastic
Body: Zinc, Metallized
Inner body: Reinforced polyamide plastic
Spout: Brass, Brass, Metallized
Countertop: Particleboard, High-pressure melamine laminate, Laminate
Tubes: Polypropylene plastic
Strainer/ Strainer basket: Stainless steel
Seals: Synthetic rubber
Front side/ Backside: Plastic foil
Edge: Plastic edging
Handle: Aluminium, Epoxy/polyester powder coating
Side panel/ Bottom panel: Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging
Back rail/ Filling: Particleboard, Plastic foil, Plastic edging
Tube: Steel, Powder coating
Foot: Polypropylene plastic (min. 20% recycled)
Plate: Steel, Powder coating, Galvanized steel
Rivet: Steel, Epoxy/Acrylic coating
Tubes: Steel, Powder coating
Wedge: Steel, Epoxy/Acrylic coating
Basematerial: Stainless steel
Foam: Polyurethane plastic
Body: Zinc, Metallized
Inner body: Reinforced polyamide plastic
Spout: Brass, Brass, Metallized
Countertop: Particleboard, High-pressure melamine laminate, Laminate
Tubes: Polypropylene plastic
Strainer/ Strainer basket: Stainless steel
Seals: Synthetic rubber
Care Instructions
To prevent permanent stains on the worktop, wipe clean spills or messes immediately with a soft cloth dampened in water and a mild washing-up detergent or soap.
Good to Know
Safety and compliance
Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Assembly and installation
The countertop is pre-cut to measure 139 cm. May not be cut.
Be aware that tools and preparation are required to cut holes for sink and tap to secure a perfect fit.
What’s included
Cabinet, supporting side panel/leg, leg, countertop, sink, water trap, tap and knob/handle included.
Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Assembly and installation
The countertop is pre-cut to measure 139 cm. May not be cut.
Be aware that tools and preparation are required to cut holes for sink and tap to secure a perfect fit.
What’s included
Cabinet, supporting side panel/leg, leg, countertop, sink, water trap, tap and knob/handle included.
Designer
IKEA of Sweden
Benefits
A practical solution that provides both a workspace and a dedicated space for storing things underneath.
A sink in the laundry area is convenient for washing clothes by hand or filling/emptying cleaning buckets.
The countertop is suitable for use in wet or humid spaces which makes this solution a good option if you are creating a laundry area in your bathroom.
Add ENHET hooks to the supporting side panel to hang towels or create more storage space with SKATTÅN containers. Sold separately.
Good sense and feel in beautiful partnership. The foil surface resists moisture, scratches and bumps, while the wood pattern creates a lively and warm expression.
10 year guarantee. Read about the terms in the guarantee brochure.
A sink in the laundry area is convenient for washing clothes by hand or filling/emptying cleaning buckets.
The countertop is suitable for use in wet or humid spaces which makes this solution a good option if you are creating a laundry area in your bathroom.
Add ENHET hooks to the supporting side panel to hang towels or create more storage space with SKATTÅN containers. Sold separately.
Good sense and feel in beautiful partnership. The foil surface resists moisture, scratches and bumps, while the wood pattern creates a lively and warm expression.
10 year guarantee. Read about the terms in the guarantee brochure.
Κριτικές
Κριτικές
