Table min. length: 130 cm
Table max. length: 190 cm
Table width: 80 cm
Table height: 75 cm
Chair width: 52 cm
Chair depth: 59 cm
Chair height: 95 cm

This product comes as 2 package(s).

Article Number

705.874.98 x1

BERGMUND chair frame (00400140)
Quantity: x4

BERGMUND chair cover (70486201)
Quantity: x4

NÄSINGE extendable table, 130/190x80 cm (70587498)
Quantity: x1

Table top: Particleboard, Fibreboard, Clear acrylic lacquer, Paper foil, Beech veneer, Stain, Clear lacquer
Extension leaf: Particleboard, Clear acrylic lacquer, Fibreboard, Paper foil, Beech veneer, Stain, Clear lacquer
Under frame/ Leg: Solid wood, Adhesive, Stain, Clear acrylic lacquer
Cross rail: Solid wood, Adhesive
Back fabric/ Lining: 100 % polyester (100% recycled)
Cover/ Fabric: 65% polyester (min. 90% recycled), 35% cotton
Leg: Layer-glued wood veneer, Stain, Clear acrylic lacquer
Seat frame: Steel, Epoxy coating
Backrest frame: Steel
Support panel: Polyethylene plastic
Backrest cushion/ Seat cushion: 100% polyester
Lining/ Smoulder resistant lining: Polyester wadding

Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Machine wash, max 30°C, normal process.
Machine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 200°C.
Iron, max 150°C.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
Vacuum clean.
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Light stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.
For maximum quality, re-tighten the screws when necessary.

Safety and compliance
This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.
This cover's ability to resist abrasion has been tested to handle 20,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.
This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.

What’s included
4 plastic feet included to protect the floor against scratches.
1 self-storing extension leaf included.

Additional information
Only recommended for indoor use.
Seats 4-6.
Possible to separate for recycling or energy recovery if available in your community.

Sold separately
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
Extra covers for BERGMUND chair are available in many different models, colours and materials, sold separately.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.

Ergonomics
Removable washable cover.

IKEA of Sweden

NÄSINGE tables feature refined details, including chamfered legs and tabletop with an edge profile, adding elegance and a classic touch while softening sharp corners.
This 4-seat table can easily be extended into a 6-seat table using the included self-storing leaf.
The self-storing leaf is easy to insert to extend the table and just as easy to remove and tuck away under the table top when your guests have gone home.
The extension leaf increases the overhang at each end of the table creating generous space for two more people at the short ends.
The dark brown table top has a hardwood veneer top layer that is both stained and lacquered for durability and to allow the natural wooden texture to shine through.
Each table is unique, with varying grain patterns and natural colour shifts that are part of the charm of wood.
You can sit comfortably for a long time. The angle of the back rest provides good lumbar support. The backrest angle combined with the upholstered seat make the chair perfect for long dinners.
ORRSTA cover is woven from cotton and polyester with a light structure that makes it soft and comfortable. The yarn-dyed fabric has a tone-on-tone effect and a clean and calm look.
The cover is easy to keep clean as it is removable and can be washed.
The chair legs are made of solid wood, which is a durable natural material.
Coordinates well with storage furniture in the IDANÄS series, offering a harmonious match in style, colour and material.